Home / Remodel / Kitchen Remodel Cost for a 10x10 Kitchen
How much does a 10x10 kitchen remodel cost?
The short answer
A 10x10 kitchen, the industry's standard 100 sq ft benchmark with about 20 linear feet of cabinets, typically costs $15,000 to $45,000 for a mid-range remodel with the layout unchanged. Stock cabinets, laminate or entry butcher block counters, and standard appliances sit at the low end. Semi-custom cabinets, stone counters, and tile work push toward the top.
Contractors and cabinet companies quote the 10x10 because it normalizes comparisons: the same room, the same cabinet run, three levels of finish. Use it to compare bids apples to apples, then adjust for your real kitchen, since most are bigger and most homeowners change more than the benchmark assumes.
The benchmark assumes no layout change, no moved plumbing or gas, and no structural work. The moment a wall opens or a sink moves, you are pricing a different project.
Three levels for the benchmark kitchen
| Level | What you get | Typical total |
|---|---|---|
| Pull and replace, stock | Stock cabinets, laminate counters, basic appliance package, vinyl floor | $12,000 to $25,000 |
| Mid-range, semi-custom | Semi-custom cabinets, stone or quartz counters, tile backsplash, LVP or tile floor | $25,000 to $45,000 |
| Upscale, layout unchanged | Inset or custom-front cabinets, premium stone, pro-style range, hardwood | $45,000 to $75,000 |
Cabinets alone are usually 30 to 40 percent of the total. That is why the cabinet decision, stock versus semi-custom, predicts the final bill better than any other single choice.
What the benchmark leaves out
- Layout changes, moved sinks, gas lines, and walls
- Electrical panel upgrades for modern appliance loads
- Subfloor repair and leveling
- Permits, design fees, and dumpster or disposal costs
- Eating out and temporary kitchen costs during 4 to 8 weeks of work
How to use a 10x10 quote
Ask every bidder to price the same benchmark scope in writing, with allowances listed separately for counters, tile, and appliances. Bids that hide allowances cannot be compared. Then walk your actual kitchen with the winning bid and price the differences line by line.
For the full picture across sizes and finishes, our kitchen remodel cost guide has the calculator and the complete breakdown.
Questions homeowners ask
Why do quotes for the same kitchen vary so much?
Allowances and scope assumptions. One bid assumes laminate, another quartz, a third quietly includes the panel upgrade. Itemized written scopes expose the difference in minutes.
How long does a 10x10 remodel take?
Four to eight weeks of active work for a pull-and-replace scope, plus cabinet lead time of four to ten weeks before demolition starts.
Is a 10x10 kitchen small?
It is a compact galley or small L. Many suburban kitchens run 150 to 250 sq ft, which is why real bills often exceed benchmark headlines.